Skip to Content

Crochet Newborn Coat-Bloomers

Save this pattern for later!

Free crochet newborn coat-bloomers pattern, a delight to make and will look beautiful on any newborn. It’s an adorable two piece outfit consisting of a collared coat and bloomers.

 

crochet newborn coat-bloomers

Crochet Newborn Coat-Bloomers

 

Disclaimer:

This site contains affiliate links. If you make a purchase after clicking on an affiliate link, I may receive a small commission (at no extra expense to you)

 

white red set

 

Check out more of my pretty newborn baby outfits:

 

crochet newborn coat pattern

 

Crocheted in a solid colour and then edged in a contrast, suitable for baby boys or girls. This crochet newborn coat-bloomers set is one I’m sure Grandma would love to make.

 

crochet bloomers with red

 

~ Pin this crochet newborn coat-bloomers pattern to your Pinterest Boards ~

 

newborn coat-bloomers set

 

~ I would love to see what you make, tag me on Facebook @crochetncreate ~

 

red edge coat

 

The crochet newborn coat-bloomers pattern on this page is FREE to you, just scroll down and copy and paste the pattern onto a text document to print.
OR
If you prefer you can

~ purchase an (advert free) PDF from: ~
crochetbabypatterns

 

complete newborn baby set

 

~ add this crochet crochet newborn coat-bloomers pattern
to your queue on: ~

Ravelry

 

Crochet Newborn Coat-Bloomers UK

Pattern Number BFJC154

Skill Level: Intermediate

Abbreviations UK
WS.    Wrong Side

RS.     Right Side
ch.      Chain
dc.      Double Crochet
htr.     Half Treble Crochet
tr.       Treble Crochet
rpt.     Repeat
ss.       Slip Stitch
Inc.     Increase
yrh.     Yarn Round Hook

Shell Group. 7tr into same 3ch space.

Dec 1dc.  Pull up loop from each of next 2dc, yrh, pull though all loops

Base of ch. Work into first stitch

3ch counts as first tr
2ch counts as first htr

Size to Fit approx:– 14 Inch chest Newborn Baby
Coat: Finished length from shoulder approx 9 Inches
Sleeve length from under arm to cuff approx 4 Inches

Bloomers: Finished length from waist to ankle approx 10 inches

Materials
For great results it is always best to use the recommended yarn, I have used approximately:-

100 grams of King Cole big value baby DK yarn in Colour 1
50 grams of King Cole big value baby DK yarn in Colour 2

4.00mm Clover Crochet Hook, 3 buttons

TENSION – 4tr and 2.5 rows measures approx 1 Inch

************************************************

Scroll down the page for the USA format

UK INSTRUCTIONS:

Worked in one piece starting with the yoke.

Coat – With colour 1 make 49ch, (RS) 1tr into 4th ch from hook, 1tr into each ch to end. Turn. (46tr + 3ch)

2nd Row – (Inc Row) 3ch, 1tr into each of next 2tr, * 2tr into next tr, 1tr into each of next 3tr, * rpt from * to * to last 3tr and 3ch, 2tr into next tr, 1tr into each of next 2tr, 1tr into top of 3ch. Turn. (57tr + 3ch)

3rd Row – 3ch, 1tr into each tr to end, 1tr into top of 3ch. Turn.

4th Row – (Inc Row) 3ch, 1tr into next tr * 2tr into next tr, 1tr into each of next 2tr * rpt from * to * to last tr and 3ch, 2tr into tr, 1tr into top of 3ch. Turn. (76tr + 3ch)

5th Row – Rpt 3rd Row. 

6th Row – (Inc Row) 3ch, 1tr into next tr, * 2tr into next tr, 1tr into each of next 2tr * rpt from * to * to last 2tr and 3ch, 2tr into next tr, 1tr into last tr, 1tr into top of 3ch Fasten off. Turn. (101tr + 3ch)

7th Row – (Inc Row) Join in colour 2, work 1ch, 1dc into base of 1ch, * 2dc into next tr, 1dc into each of next 3tr, * rpt from * to * to last 4tr and 3ch, 2dc into next tr, 1dc into each of next 2tr, miss 1tr, 1dc into top of 3ch. Fasten off. Turn. (126dc)

Commence Body – With colour 1 make 2ch, 1htr into next dc, * 3ch, miss 2dc, 1dc into next dc, * rpt from * to * to last 4dc, work 3ch, miss 2dc, 1htr into last 2dc. Turn. (41, 3ch spaces)

Next row –  1ch, 1dc into base of 1ch, 1dc into next htr, * 7tr into next 3ch space, 1dc into next 3ch space, * rpt from * to * to last 3ch space, htr and 2ch, 7tr into next 3ch space, 1dc into htr, 1dc into top of 2ch. Turn. (21, shell groups)

Divide for Armholes – 2ch, 1htr into next dc, 1ch, miss next 2tr, 1dc into next tr, * 3ch, miss next tr, 1dc into next tr, 1ch, miss 2tr, 1htr into next dc, 1ch, miss 2tr, 1dc into next tr, * rpt from * to * once more, 3ch, miss 1tr, 1dc into next tr, 1ch, 1htr into dc, 3ch, miss four 7tr groups, (first sleeve) 1htr into next dc, 1ch, miss 2tr, 1dc into next tr, rpt from * to * 6 more times, 3ch, miss 1tr, 1dc into next tr, 1ch, 1htr into next dc, 3ch, miss four 7tr groups, (second sleeve) 1htr into next dc, 1ch, miss 2tr, 1dc into next tr, rpt from * to * twice more, 3ch, miss 1dc, 1dc into next dc, 1ch, miss 2tr, 1htr into each of last 2dc. Turn. (15, 3ch spaces)

Next Row – 1ch, 1dc into base of 1ch, 1dc into next htr, * 7tr into next 3ch space, 1dc into next htr, * rpt from * to * including working into 3ch spaces underarms, to last 3ch space 1htr and 2ch, 7tr into next 3ch space, 1dc into htr, 1dc into top of 2ch. Turn. (15, shell groups)

Pattern Row 1 – 2ch, 1htr into next dc, 1ch, miss next 2tr, 1dc into next tr, * 3ch, miss next tr, 1dc into next tr, 1ch, 1htr into next dc, 1ch, miss 2tr, 1dc into next tr, * rpt from * to * to last 4tr and 2dc, make 3ch, miss 1tr, 1dc into next tr, 1ch, miss 2tr, 1htr into each of last 2dc. Turn.

Pattern Row 2 – 1ch, 1dc into base of 1ch, 1dc into next htr, * 7tr into next 3ch space, 1dc into next htr, * rpt from * to * to last 3ch space, 1htr and 2ch, 7tr into next 3ch space, 1dc into htr, 1dc into top of 2ch. Turn.

Rpt Pattern Rows 1 & 2 until 8 shell groups have been worked from yoke or work measures approx 9 Inches from shoulder. Fasten off.

Sleeves x 2 – With colour 1 and WS facing, rejoin yarn to same dc at base of armhole where you divided, 2ch, 1htr into base of 2ch, 1ch, miss next 2tr, 1dc into next tr, * 3ch, miss next tr, 1dc into next tr, 1ch, 1htr into next dc, 1ch, miss 2tr, 1dc into next tr, * rpt from * to *  twice more, 3ch, miss next tr, 1dc into next tr, 1ch, 1htr into same dc where you divided for armhole, 1ch, working into the bottom of the 7tr group on skirt of jacket, (see picture below) miss first 3tr, 1dc between next tr, 3ch, miss 1tr, 1dc between next tr, 1ch, miss 3tr, ss to top of 2ch on beginning of row. Turn. (5, 3ch spaces)

sleeve wip uk

Row 2 – 1ch, 1dc into base of 1ch, * 7tr into next 3ch space, 1dc into next htr, * rpt from * to * to last 3ch space and htr, 7tr into 3ch space 1dc into htr, ss to first dc on beginning of row. Turn. (5, 7tr groups)

Row 3 – 2ch, 1htr in next dc, 1ch, miss next 2tr, 1dc into next tr, * 3ch, miss next tr, 1dc into next tr, 1ch, miss 2tr, 1htr into next dc, 1ch, miss 2tr, 1dc into next tr, * rpt from * to * 3 more times, 3ch, miss 1tr, 1dc in next tr, 1ch, miss 2tr, ss to top of 2ch on beginning of row. Turn. (5, 3ch spaces)

Row 4 – 1ch, 1dc into base of 1ch, * 7tr into next 3ch space, 1dc into next htr, * rpt from * to * to last 3ch space and htr, 7tr into 3ch space 1dc into htr, ss to first dc on beginning of row. Turn. (5, shell groups)

Rpt Rows 3 & 4 until six, shell group rows have been worked in all from yoke, or sleeve seam measures approx 4 Inches. Fasten off.

Button/Buttonhole Bands

Buttonhole Band – With WS facing, join colour 1 to neck edge on right hand side of jacket, make 1ch, work 38dc evenly down right front edge to corner. Fasten off. Turn.

Next row – Join in colour 2, make 1ch, 1dc into base of 1ch, 1dc into each dc to end. Fasten off. Turn.

Buttonhole Row – Join in colour 1, work 1ch, 1dc into base of 1ch, * make 2ch, miss 1dc, 1dc into next 5dc, * rpt from * to * once, make 2ch, miss 1dc, 1dc into each dc to end. Turn. (3 buttonholes)

Starting with 1ch, 1dc into base of 1ch, work 1 more row of 1dc into each dc and 2ch space to end. Fasten off.

Button Band – Return to second side and with WS side facing join in colour 1, working from bottom edge up, make 1ch, work 38dc evenly along edge to neck. Fasten off. Turn.

Join in colour 2, work 1ch, 1dc into base of 1ch, 1dc into each dc to end. Fasten off. 

Next Row – Join in colour 1, work 1ch, 1dc into base of 1ch, work 2 more rows of 1dc into each dc to end. Fasten off.

Collar – Working along cast on ch of neck edge with WS facing, join colour 1 to first ch after button band, make 3ch, work 1tr in each ch to end, turn leaving buttonhole band un-worked on opposite side. (46tr + 3ch)

Row One – (Inc Row) 3ch, 1tr into each of next 2tr, * 2tr into next tr, 1tr into each of next 3tr, * rpt from * to * to last 3tr and 3ch, 2tr into next tr, 1tr into each of next 2tr, 1tr into top of 3ch. Fasten off. Turn. , (57tr + 3ch)

Row Two –  (Inc Row) Join in colour 2, make 1ch, 1dc into base of 1ch, 2dc into next tr, 1dc into each tr to last tr and 3ch, 2dc into next tr, 1dc into top of 3ch. Fasten off. Turn. (60dc)

Row Three – Join colour 1, make 2ch, 1htr into next dc, * 3ch, miss 2dc, 1dc into next dc, * rpt from * to * to last 4dc, make 3ch, miss 2dc, 1htr into each of last 2dc. Turn. (19, 3ch spaces)

Row Four – 1ch, 1dc into base of 1ch, 1dc into next htr, * 7tr into next 3ch space, 1dc into next 3ch space, * rpt from * to * to last 3ch space, htr and 2ch, 7tr into next 3ch space, 1dc into htr, 1dc into top of 2ch. Fasten off. (10, shell groups)

Finishing – Weave in and trim off any loose ends of yarn. Sew on buttons to correspond with buttonholes.

Bloomers – With colour 1, make 72ch loosely, ss to first ch to make a round, work 3ch, 1tr into each ch to end, ss to top of 3ch on beginning of row. Turn. (71tr + 3ch)

Starting with 3ch, work 1tr into each tr to end, ss to top of 3ch on beginning of row. Turn.

Rpt last row until 10 rows have been worked in all or work measures approx 4.5 Inches from beginning. Turn.

Divide for Legs – 3ch, 1tr into each of next 35tr, ss to top of 3ch on beginning of row. Turn leaving remaining 36tr un-worked.

First Leg – 3ch, 1tr into each tr to end, ss to top of 3ch on beginning of row. Turn. (35tr + 3ch)

Rpt last row until 10 rows have been worked in all from division or leg seam measures approx 5 Inches.

Leg Cuff – ( Dec Row) 1ch, 1dc into base of 1ch, 1dc into next dc, * dec 1dc over next 2dc, (see abbrev) 1dc into each of next 2dc, * rpt from * to * to last 2dc, dec 1dc over last 2dc, ss to first dc on beginning of row. Turn.

Starting with 1ch, 1dc into base of 1ch, work 2 more rows of 1dc into each dc to end, slip stitch to first dc on the beginning of each row. Fasten off.

Second Leg – Return to un-worked stitches at division, rejoin yarn to next tr, complete second leg the same as the first. Fasten off.

With RS of work facing join colour 1 to starting ch on waist, work 1ch, 1dc into each ch to end, ss to first dc on beginning of row. Turn. (72dc)

Starting with 1ch, 1dc into base of 1ch, work two more rows of 1dc into each dc to end, slip stitch to first dc on beginning of each row. Fasten off.

Chain Ties – Using colour 2
Waist – Make 130ch. Fasten off.
Ankles – Make 75ch. Fasten off.

Finishing – Weave in any loose ends of yarn and trim off.  Turn through to RS. Thread chain ties through waist and ankles and tie with bows.

USA format below:-

Crochet Newborn Coat-Bloomers

crochet newborn coat-bloomers

Crochet Newborn Coat-Bloomers USA

Pattern Number BFJC154

Skill Level: Intermediate

Abbreviations USA
WS.      Wrong Side

RS.       Right Side
ch.        Chain
sc.        Single Crochet
hdc.      Half Double Crochet
dc.        Double Crochet
rpt.       Repeat
sl st.     Slip Stitch
Inc.      Increase
yo.        Yarn Over

Shell Group. 7dc in same ch3 space.

Dec 1sc.  Pull up loop from each of next 2sc, yo, pull though all loops

Base of ch. Work in first stitch

ch3 counts as first dc
ch2 counts as first hdc

Size to Fit approx:– 14 Inch chest Newborn Baby
Coat: Finished length from shoulder approx 9 Inches
Sleeve length from under arm to cuff approx 4 Inches

Bloomers: Finished length from waist to ankle approx 10 inches

Materials
For great results it is always best to use the recommended yarn, I have used approximately:-

100 grams of King Cole Big Value Baby DK yarn in color 1
50 grams of King Cole big value baby DK yarn in color 2

An equivalent yarn would be a light worsted #3

4.00mm Clover Crochet Hook, 3 buttons

GAUGE – 4dc and 2.5 rows measures approx 1 Inch

******************************************

USA INSTRUCTIONS:

Worked in one piece starting with the yoke.

Coat – With color 1 ch49, (RS) 1dc in 4th ch from hook, 1dc in each ch to end. Turn. (46dc + ch3)

2nd Row – (Inc Row) ch3, 1dc in each of next 2dc, * 2dc in next dc, 1dc in each of next 3dc, * rpt from * to * to last 3dc and ch3, 2dc in next dc, 1dc in each of next 2dc, 1dc in top of ch3. Turn. (57dc + ch3)

3rd Row – ch3, 1dc in each dc to end, 1dc in top of ch3. Turn.

4th Row – (Inc Row) ch3, 1dc in next dc * 2dc in next dc, 1dc in each of next 2dc * rpt from * to * to last dc and ch3, 2dc in dc, 1dc in top of ch3. Turn. (76dc + ch3)

5th Row – Rpt 3rd Row. 

6th Row – (Inc Row) ch3, 1dc in next dc, * 2dc in next dc, 1dc in each of next 2dc * rpt from * to * to last 2dc and ch3, 2dc in next dc, 1dc in last dc, 1dc in top of ch3 Fasten off. Turn. (101dc + ch3)

7th Row – (Inc Row) Join in color 2, ch1, 1sc in base of ch1, * 2sc in next dc, 1sc in each of next 3dc, * rpt from * to * to last 4dc and ch3, 2sc in next dc, 1sc in each of next 2dc, skip 1dc, 1sc in top of ch3. Fasten off. Turn. (126sc)

Commence Body – With color 1 ch2, 1hdc in next sc, * ch3, skip 2sc, 1sc in next sc, * rpt from * to * to last 4sc, ch3, skip 2sc, 1hdc in last 2sc. Turn. (41, ch3 spaces)

Next row –  ch1, 1sc in base of ch1, 1sc in next hdc, * 7dc in next ch3 space, 1sc in next ch3 space, * rpt from * to * to last ch3 space, hdc and ch2, 7dc in next ch3 space, 1sc in hdc, 1sc in top of ch2. Turn. (21, shell groups)

Divide for Armholes – ch2, 1hdc in next sc, ch1, skip next 2dc, 1sc in next dc, * ch3, skip next dc, 1sc in next dc, ch1, skip 2dc, 1hdc in next sc, ch1, skip 2dc, 1sc in next dc, * rpt from * to * once more, ch3, skip 1dc, 1sc in next dc, ch1, 1hdc in sc, ch3, skip four 7dc groups, (first sleeve) 1hdc in next sc, ch1, skip 2dc, 1sc in next dc, rpt from * to * 6 more times, ch3, skip 1dc, 1sc in next dc, ch1, 1hdc in next sc, ch3, skip four 7dc groups, (second sleeve) 1hdc in next sc, ch1, skip 2dc, 1sc in next dc, rpt from * to * twice more, ch3, skip 1sc, 1sc in next sc, ch1, skip 2dc, 1hdc in each of last 2sc. Turn. (15, ch3 spaces)

Next Row – ch1, 1sc in base of ch1, 1sc in next hdc, * 7dc in next ch3 space, 1sc in next hdc, * rpt from * to * including working in ch3 spaces underarms, to last ch3 space 1hdc and ch2, 7dc in next ch3 space, 1sc in hdc, 1sc in top of ch2. Turn. (15, shell groups)

Pattern Row 1 – ch2, 1hdc in next sc, ch1, skip next 2dc, 1sc in next dc, * ch3, skip next dc, 1sc in next dc, ch1, 1hdc in next sc, ch1, skip 2dc, 1sc in next dc, * rpt from * to * to last 4dc and 2sc, ch3, skip 1dc, 1sc in next dc, ch1, skip 2dc, 1hdc in each of last 2sc. Turn.

Pattern Row 2 – ch1, 1sc in base of ch1, 1sc in next hdc, * 7dc in next ch3 space, 1sc in next hdc, * rpt from * to * to last ch3 space, 1hdc and ch2, 7dc in next ch3 space, 1sc in hdc, 1sc in top of ch2. Turn.

Rpt Pattern Rows 1 & 2 until 8 shell groups have been worked from yoke or work measures approx 9 Inches from shoulder. Fasten off.

Sleeves x 2 – With color 1 and WS facing, rejoin yarn to same sc at base of armhole where you divided, ch2, 1hdc in base of ch2, ch1, skip next 2dc, 1sc in next dc, * ch3, skip next dc, 1sc in next dc, ch1, 1hdc in next sc, ch1, skip 2dc, 1sc in next dc, * rpt from * to *  twice more, ch3, skip next dc, 1sc in next dc, ch1, 1hdc in same sc where you divided for armhole, ch1, working in the bottom of the 7dc group on skirt of jacket, (see picture below) skip first 3dc, 1sc between next dc, ch3, skip 1dc, 1sc between next dc, ch1, skip 3dc, sl st to top of ch2 on beginning of row. Turn. (5, ch3 spaces)

sleeve wip usa

Row 2 – ch1, 1sc in base of ch1, * 7dc in next ch3 space, 1sc in next hdc, * rpt from * to * to last ch3 space and hdc, 7dc in ch3 space 1sc in hdc, sl st to first sc on beginning of row. Turn. (5, 7dc groups)

Row 3 – ch2, 1hdc in next sc, ch1, skip next 2dc, 1sc in next dc, * ch3, skip next dc, 1sc in next dc, ch1, skip 2dc, 1hdc in next sc, ch1, skip 2dc, 1sc in next dc, * rpt from * to * 3 more times, ch3, skip 1dc, 1sc in next dc, ch1, skip 2dc, sl st to top of ch2 on beginning of row. Turn. (5, ch3 spaces)

Row 4 – ch1, 1sc in base of ch1, * 7dc in next ch3 space, 1sc in next hdc, * rpt from * to * to last ch3 space and hdc, 7dc in ch3 space 1sc in hdc, sl st to first sc on beginning of row. Turn. (5, shell groups)

Rpt Rows 3 & 4 until six, shell group rows have been worked in all from yoke, or sleeve seam measures approx 4 Inches. Fasten off.

Button/Buttonhole Bands

Buttonhole Band – With WS facing, join color 1 to neck edge on right hand side of jacket, ch1, work 38sc evenly down right front edge to corner. Fasten off. Turn.

Next row – Join in color 2, ch1, 1sc in base of ch1, 1sc in each sc to end. Fasten off. Turn.

Buttonhole Row – Join in color 1, ch1, 1sc in base of ch1, * ch2, skip 1sc, 1sc in next 5sc, * rpt from * to * once, ch2, skip 1sc, 1sc in each sc to end. Turn. (3 buttonholes)

Starting with ch1, 1sc in base of ch1, work 1 more row of 1sc in each sc and ch2 space to end. Fasten off.

Button Band – Return to second side and with WS side facing join in color 1, working from bottom edge up, ch1, work 38sc evenly along edge to neck. Fasten off. Turn.

Join in color 2, ch1, 1sc in base of ch1, 1sc in each sc to end. Fasten off. 

Next Row – Join in color 1, ch1, 1sc in base of ch1, work 2 more rows of 1sc in each sc to end. Fasten off.

Collar – Working along cast on ch of neck edge with WS facing, join color 1 to first ch after button band, ch3, work 1dc in each ch to end, turn leaving buttonhole band un-worked on opposite side. (46dc + ch3)

Row One – (Inc Row) ch3, 1dc in each of next 2dc, * 2dc in next dc, 1dc in each of next 3dc, * rpt from * to * to last 3dc and ch3, 2dc in next dc, 1dc in each of next 2dc, 1dc in top of ch3. Fasten off. Turn. (57dc + ch3)

Row Two –  (Inc Row) Join in color 2, ch1, 1sc in base of ch1, 2sc in next dc, 1sc in each dc to last dc and ch3, 2sc in next dc, 1sc in top of ch3. Fasten off. Turn. (60sc)

Row Three – Join color 1, ch2, 1hdc in next sc, * ch3, skip 2sc, 1sc in next sc, * rpt from * to * to last 4sc, ch3, skip 2sc, 1hdc in each of last 2sc. Turn. (19, ch3 spaces)

Row Four – ch1, 1sc in base of ch1, 1sc in next hdc, * 7dc in next ch3 space, 1sc in next ch3 space, * rpt from * to * to last ch3 space, hdc and ch2, 7dc in next ch3 space, 1sc in hdc, 1sc in top of ch2. Fasten off. (10, shell groups)

Finishing – Weave in and trim off any loose ends of yarn. Sew on buttons to correspond with buttonholes.

Bloomers – With color 1, ch72 loosely, sl st to first ch to make a round, ch3, 1dc in each ch to end, sl st to top of ch3 on beginning of row. Turn. (71dc + ch3)

Starting with ch3, work 1dc in each dc to end, sl st to top of ch3 on beginning of row. Turn.

Rpt last row until 10 rows have been worked in all or work measures approx 4.5 Inches from beginning. Turn.

Divide for Legs – ch3, 1dc in each of next 35dc, sl st to top of ch3 on beginning of row. Turn leaving remaining 36dc un-worked.

First Leg – ch3, 1dc in each dc to end, sl st to top of ch3 on beginning of row. Turn. (35dc + ch3)

Rpt last row until 10 rows have been worked in all from division or leg seam measures approx 5 Inches.

Leg Cuff – ( Dec Row) ch1, 1sc in base of ch1, 1sc in next sc, * dec 1sc over next 2sc, (see abbrev) 1sc in each of next 2sc, * rpt from * to * to last 2sc, dec 1sc over last 2sc, sl st to first sc on beginning of row. Turn.

Starting with ch1, 1sc in base of ch1, work 2 more rows of 1sc in each sc to end, slip stitch to first sc on the beginning of each row. Fasten off.

Second Leg – Return to un-worked stitches at division, rejoin yarn to next dc, complete second leg the same as the first. Fasten off.

With RS of work facing join color 1 to starting ch on waist, ch1, 1sc in each ch to end, sl st to first sc on beginning of row. Turn. (72sc)

Starting with ch1, 1sc in base of ch1, work two more rows of 1sc in each sc to end, slip stitch to first sc on beginning of each row. Fasten off.

Chain Ties – Using color 2
Waist – ch130. Fasten off.
Ankles – ch75. Fasten off.

Finishing – Weave in any loose ends of yarn and trim off.  Turn through to RS. Thread chain ties through waist and ankles and tie with bows.

 

Google Web Story:- Newborn Coat-Bloomers

crochet newborn coat-bloomers

 

All pattern sizing, yarn weights, gauges etc on this website are approx as everybody crochets differently. Every effort is made to ensure the free crochet patterns are correct, but I am only human so mistakes may be made, if you find one please let me know by e-mail on [email protected]

The written instructions and pictures for this free crochet newborn coat-bloomers pattern are copyrighted to crochet ‘n’ create © 2022. You are welcome to sell the finished products made from the free crochet newborn coat-bloomers pattern, I just ask that you please use your own pictures and put a link back to crochet ‘n’ create.

If you wish to tell your friends and followers about this pattern, please only use a direct link to the pattern page on crochet ‘n’ create. DO NOT share the written instructions for this free crochet newborn coat-bloomers pattern.

crochet newborn coat-bloomers