Crochet Matinee Baby Outfit - Crochet 'n' Create

Crochet matinee baby outfit, an ideal coming home set for a new mom, lovely for a baby shower gift.

Crocheted using the two row repeat shell and v-stitch design, this free crochet baby pattern is a joy to make.

The bonnet is finished with a row of shells back and front.

Crochet Matinee Baby Outfit

Disclaimer

This site contains affiliate links. If you make a purchase after clicking on an affiliate link, I may receive a small commission (at no extra expense to you)

See more free crochet babies & children patterns:-

PIN THIS PROJECT FOR LATER!

Formats

Two easy formats have been used to write this crochet matinee baby outfit pattern for UK crocheters and USA crafters.

Abbreviations UK & USA
WS. Wrong Side
RS. Right Side
ch. Chain
dc. Double Crochet – sc
tr. Treble Crochet – dc
rpt. Repeat
ss. Slip Stitch – sl st
BLO. Back Loop Only
FLO. Front Loop Only

Best Yarn

For great results from this free crochet baby pattern it is always best to use the recommended yarn in the pattern materials section.

I have used King Cole Big Value Baby DK in white for colour 1 and Stylecraft Special DK in citron for colour 2 for the crochet matinee baby outfit, but there are many other shades to choose in both yarns.

Crochet Hook Size

Pattern asks for a 4.00mm crochet hook, change hook sizes higher or lower to make the outfit bigger or smaller, you can also change the thickness of yarn.

~ purchase an (advert free) PDF of this crochet matinee baby outfit pattern from: ~
my crochetbabypatterns Shop

Copyrights

The written instructions and pictures for this free crochet matinee baby outfit pattern are the sole property of crochetncreate. The pattern is copyright protected © 2024 and cannot be copied or reproduced in any way. You are welcome to sell your finished items made from this pattern, I require a mention or a link back to this pattern. My photos are copyright protected and are not to be used to sell your items.

Crochet Matinee Baby Outfit

Crochet Matinee Baby Outfit UK

Pattern Number CNC500

Skill Level: Intermediate

Abbreviations UK
WS. Wrong Side
RS. Right Side
ch. Chain
dc. Double Crochet
tr. Treble Crochet
rpt. Repeat
ss. Slip Stitch
BLO. Back Loop Only
FLO. Front Loop Only

Shell. (2tr, 1ch, 2tr) into same space or stitch

vst. (1tr, 2ch, 1tr) into same space or stitch

3ch counts as first tr

Base of ch. Work into first stitch

Size to fit approx: 16 inch chest 0-3 month baby
Coat length from shoulder approx 10.5 inches
Sleeve length under arm to cuff approx 5.5 inches

Pants length from waist to ankle approx 11 inches

Materials
For great results it is always best to use the recommended yarn, I have used approximately:-
150 grams of King Cole Big Value Baby DK yarn in colour 1
150 grams of Stylecraft Special DK yarn in colour 2

4.00mm crochet hook, 3 small buttons

TENSION – 2 shells & 4 rows of tr measures approx 2 inches

**********************************************

Scroll down the page for the USA format

UK INSTRUCTIONS:

Coat – Worked in one piece starting from yoke.

Using 4.00mm hook make 55ch 1tr into 4th ch from hook, 1tr into the next 6ch, (front), 3tr into next ch, 1tr into next 8ch, (shoulder), 3tr into next ch, 1tr into the next 17ch, (back), 3tr into next ch, 1tr into the next 8ch, (shoulder), 3tr into next ch, 1tr into the next 8ch, (front). Turn. (60tr + 3ch)

2nd Row – 3ch, 1tr into the next 8tr, 3tr into next tr, 1tr into next 10tr, 3tr into next tr, 1tr into the next 19tr, 3tr into next tr, 1tr into the next 10tr, 3tr into the next tr, 1tr into the next 8tr, 1tr into turning ch. Turn. (68tr + 3ch)

3rd Row – 3ch, 1tr into the next 9tr, 3tr into next tr, 1tr into next 12tr, 3tr into next tr, 1tr into the next 21tr, 3tr into next tr, 1tr into the next 12tr, 3tr into the next tr, 1tr into the next 9tr, 1tr into turning ch. Turn. (76tr + 3ch)

4th Row – 3ch, 1tr into the next 10tr, 3tr into next tr, 1tr into next 14tr, 3tr into next tr, 1tr into the next 23tr, 3tr into next tr, 1tr into the next 14tr, 3tr into the next tr, 1tr into the next 10tr, 1tr into turning ch. Turn. (84tr + 3ch)

5th Row – 3ch, 1tr into the next 11tr, 3tr into next tr, 1tr into next 16tr, 3tr into next tr, 1tr into the next 25tr, 3tr into next tr, 1tr into the next 16tr, 3tr into the next tr, 1tr into the next 11tr, 1tr into turning ch. Turn. (92tr + 3ch)

6th Row – 3ch, 1tr into the next 12tr, 3tr into next tr, 1tr into next 18tr, 3tr into next tr, 1tr into the next 27tr, 3tr into next tr, 1tr into the next 18tr, 3tr into the next tr, 1tr into the next 12tr, 1tr into turning ch. Turn. (100tr + 3ch)

7th Row – 3ch, 1tr into the next 13tr, 3tr into next tr, 1tr into next 20tr, 3tr into next tr, 1tr into the next 29tr, 3tr into next tr, 1tr into the next 20tr, 3tr into the next tr, 1tr into the next 13tr, 1tr into turning ch. Turn. (108tr + 3ch)

8th Row – 3ch, 1tr into next 4tr, 2tr into next tr, 1tr into next 3tr, 2tr into next tr, 1tr into next 5tr, 5tr into next tr, 1tr into next 7tr, 2tr into next tr, 1tr into next 6tr, 2tr into next tr, 1tr into next 7tr, 5tr into next tr, 1tr into next 9tr, 2tr into next tr, 1tr into next 11tr, 2tr into next tr, 1tr into next 9tr, 5tr into next tr, 1tr into next 7tr, 2tr into next tr, 1tr into next 6tr, 2tr into next tr, 1tr into next 7tr, 5tr into next tr, 1tr into next 5tr, 2tr into next tr, 1tr into next 3tr, 2tr into next tr, 1tr into next 4tr, 1tr into top of 3ch. Turn. (134tr + 3ch)

Commence Skirt – (divide for armholes)

Make 3ch, shell (see abbrev) into next tr, * miss 2tr, shell into next tr, * rpt from * to * 4 times more, miss 2tr, shell into corner, miss next 28tr, shell into next corner, rpt from * to * 12 times more, miss 1tr, shell into corner, miss 28tr, shell into last corner, miss 1tr, shell into next tr, rpt from * to * 5 times more, miss 1tr, 1tr into top of 3ch. Turn. (28 shell groups)

First Pattern Row – 3ch, vst (see abbrev) into centre each shell to end. 1tr into top of 3ch. Turn. (28 vst)

Second Pattern Row – 3ch, shell into each 2ch space of vst to end, 1tr into top of 3ch. Turn.

Rpt First & Second Pattern Rows until work measures 9.5 inches from shoulder. Turn.

Work First Pattern Row once. Turn. Fasten off.

Change to colour 2.

Next Row – ss into 1st stitch, 3tr into vst, ss into space between next two vst, * 3tr into next vst, ss into space between next two vst, * rpt from * to * to last vst, work 3tr into vst, ss into top of 3ch. Fasten off.

Sleeves (x 2) With RS facing, join colour 1 to corner of armhole edge, make 3ch, miss 1tr, shell into next tr, * miss 2tr, shell into next tr, * rpt from * to * 7 times more, miss 2tr, 1tr into corner, ss to top of 3ch on beginning of row. Turn. (9 shell groups)

Slip stitching at the end of each row rpt First & Second Pattern Rows three more times or until under arm sleeve seam measures 4.5 inches. Turn.

Work First Pattern Row once. Turn. Fasten off.

Change to colour 2.

Button & Buttonhole Bands – Starting at lower edge with RS facing, work 40dc evenly up first front edge, 3dc into corner, 1dc into each ch around neck edge, 3dc into corner, work 40dc evenly down second front edge. Turn.

Button Band – 1ch, work 1dc into each dc to neck edge. Turn.

Working from neck down, rpt last row. Fasten off

Buttonhole Band – Join colour 1 to right front, starting at neck edge, work 1ch, 1dc into stitch at the base of the 1ch, * make 2ch, miss 2dc, work 1dc into each of next 5dc, * rpt from * to * once more, make 2ch, miss 2dc, work 1dc into each dc to end. Turn.

Next Row – 1ch, 1dc into stitch at the base of the 1ch, 1dc into each dc and 2dc into each 2ch space to end. Fasten off.

Collar – With WS facing miss front edge band, join colour 1 into first dc on corner of neck edge, 3ch, miss 1dc, shell into next dc, * miss 2dc, shell into next dc, * rpt from * to * to last dc before buttonhole band, 1tr into last dc. Turn. (18, shell groups)

Rpt First & Second Pattern Rows once.

Work First Pattern Row once. Turn. Fasten off.

Join in colour 2 with a ss into first stitch, * 3tr into next vst, ss into space between next two vst, * rpt from * to * to end, ss into top of 3ch. Fasten off.

Bloomers – With colour 2, make 89ch loosely, ss to first ch to form a round, make 3ch, work 1tr into the stitch at the base of the 3ch * miss 3ch, work shell into next ch, * rpt from * to * to last 4ch, miss 3ch, work (2tr, 1ch) into last ch, ss to top of 3ch on beginning of row. Turn. (22, shell groups)

Row 1 – ss to first 1ch space, make 5ch, 1tr into same space, work vst into each shell to end, ss to 3rd of 5ch on beginning of row. Turn.

Row 2 – ss to first ch space, make 3ch, work (1tr, 1ch, 2tr) into same space, work shell into each vst to end, ss to top of 3ch on beginning of row. Turn.

Rpt Rows 1 & 2 until work measures approx 5 inches. Turn.

Divide for legs – 3ch, work Row 1 over next 11 shells, miss 11 shells, ss to 3rd of 5ch on beginning of row. Turn. (11vst)

Continue on these st’s in pattern as set for right leg until work measures approx 9 inches from waist Turn.

Work Row 1 once. Turn. Fasten off.

Change to colour 1.

Join in colour 2 with a ss into first stitch, * 3tr into next vst, ss into space between next two vst, * rpt from * to * to end, ss to first ss. Fasten off.

Left Leg – With WS facing Join colour 2 to first un-worked shell at division for legs, make 5ch, work 1tr into same space, work Row 1 over next 11 shells, ss to 3rd of 5ch on beginning of row. Turn.

Continue on these remaining st’s and work the same as for right leg. Fasten off.

With colour 2 and WS facing, start with 1ch, 1dc into the stitch at the base of the 1ch, work 67dc evenly along cast on edge at waist. Turn. Fasten off.

Join in colour 1, starting with 1ch, 1dc into the stitch at the base of the 1ch, work 2 more rows of 1dc into each dc to end, ss to first dc on beginning of each row. Fasten off.

Chain Tie – With colour 1 make 120ch, ss into 2nd ch from hook, ss into each ch to end. Fasten off.

Bonnet – Make 59ch, (RS) work shell into 5ch from hook, * miss 3ch, shell into next ch, * rpt from * to * to last 2ch, miss 1ch, 1tr into last ch. Turn. (14 shell groups)

Next row – 3ch, work vst into each shell to end, 1tr into top of 3ch. Turn.

Next row – 3ch, work shell into each vst to end, 1tr into top of 3ch. Turn.

Rpt the last 2 rows twice more until you have 4 shell rows worked in all from beginning. Fasten off.

Back Frill – With RS facing return to the 3ch at beginning of the last row worked and join in colour 2, 1ch, 1dc into base of 1ch, working into front loop of stitch only, work * 5tr into 1ch of shell, 1dc in space between this shell and next shell * rpt from * to * to end, 1dc into last tr, Fasten off. Turn.

Back Panel – With WS facing and working on the row below last row of 5tr groups, miss 5 shells, join colour 1 between last and next shell, 3ch, vst into 1ch space of next 4 shells, 1tr between next 2 shells. Turn. (see pic below)

Starting with 3ch, work shell into each vst to end, 1tr into top of 3ch.

Continue on these st’s, working vst row and then shell row until back panel fits along the side edges. Fasten off.

With WS facing join colour 1 to starting chain edge, work 45dc evenly along ch edge. Turn.

Working through BLO work 1 row of 1dc into each to end. Turn.

Working through both loops from now on work 3 more rows of 1dc into each dc, turning at the end of each row. Fasten off.

Front Frill – With front of bonnet nearest to you and RS facing join colour 2 to front loose loops (created when you worked into BLO), 1ch, 1dc into base of 1ch, * miss 1dc, 5tr, into next dc, miss 1dc, 1dc into next dc, * rpt from * to * to end. Fasten off. (11, 5tr groups)

Joining Back Seams – Pushing back frill out of the way and on to the front of the hat, with WS facing join back seams.

Ties & Neck Edge

Make 60ch. Fasten off (will come back to later)

Make 61ch, ss into 2nd ch from hook, ss into each ch to end, with RS and back panel facing, join the chain tie to neck edge (see pic 1), work 44tr evenly along neck edge (pic 2), pick up 60ch made earlier, join chain tie to hat with a ss (pic 3), continue ss into each ch to end. Fasten off.

Finishing – Weave in and trim off all loose ends of yarn on coat, pants and bonnet. Thread chain tie through shells on waist of pants and tie in a bow. Sew on buttons to correspond with buttonholes on coat.

USA format below:-

Crochet Matinee Baby Outfit

Crochet Matinee Baby Outfit USA

Pattern Number CNC500

Skill Level: Intermediate

Abbreviations USA
WS. Wrong Side
RS. Right Side
ch. Chain
sc. Single Crochet
dc. Double Crochet
rpt. Repeat
sl st. Slip Stitch
BLO. Back Loop Only
FLO. Front Loop Only

Shell. (2dc, ch1, 2dc) in same space or stitch

vst. (1dc, ch2, 1dc) in same space or stitch

ch3 counts as first dc

Base of ch. Work in first stitch

Size to fit approx: 16 inch chest 0-3 month baby
Coat length from shoulder approx 10.5 inches
Sleeve length under arm to cuff approx 5.5 inches

Pants length from waist to ankle approx 11 inches

Materials
For great results it is always best to use the recommended yarn, I have used approximately:-
150 grams of King Cole Big Value Baby DK yarn in color 1
150 grams of Stylecraft Special DK yarn in color 2

An equivalent yarn would be a light worsted #3

4.00mm crochet hook, 3 small buttons

GAUGE – 2 shells & 4 rows of dc measures approx 2 inches

***********************************************

USA INSTRUCTIONS:

Coat – Worked in one piece starting from yoke.

Using 4.00mm hook ch55 1dc in 4th ch from hook, 1dc in the next 6ch, (front), 3dc in next ch, 1dc in next 8ch, (shoulder), 3dc in next ch, 1dc in the next 17ch, (back), 3dc in next ch, 1dc in the next 8ch, (shoulder), 3dc in next ch, 1dc in the next 8ch, (front). Turn. (60dc + ch3)

2nd Row – ch3, 1dc in the next 8dc, 3dc in next dc, 1dc in next 10dc, 3dc in next dc, 1dc in the next 19dc, 3dc in next dc, 1dc in the next 10dc, 3dc in the next dc, 1dc in the next 8dc, 1dc in turning ch. Turn. (68dc + ch3)

3rd Row – ch3, 1dc in the next 9dc, 3dc in next dc, 1dc in next 12dc, 3dc in next dc, 1dc in the next 21dc, 3dc in next dc, 1dc in the next 12dc, 3dc in the next dc, 1dc in the next 9dc, 1dc in turning ch. Turn. (76dc + ch3)

4th Row – ch3, 1dc in the next 10dc, 3dc in next dc, 1dc in next 14dc, 3dc in next dc, 1dc in the next 23dc, 3dc in next dc, 1dc in the next 14dc, 3dc in the next dc, 1dc in the next 10dc, 1dc in turning ch. Turn. (84dc + ch3)

5th Row – ch3, 1dc in the next 11dc, 3dc in next dc, 1dc in next 16dc, 3dc in next dc, 1dc in the next 25dc, 3dc in next dc, 1dc in the next 16dc, 3dc in the next dc, 1dc in the next 11dc, 1dc in turning ch. Turn. (92dc + ch3)

6th Row – ch3, 1dc in the next 12dc, 3dc in next dc, 1dc in next 18dc, 3dc in next dc, 1dc in the next 27dc, 3dc in next dc, 1dc in the next 18dc, 3dc in the next dc, 1dc in the next 12dc, 1dc in turning ch. Turn. (100dc + ch3)

7th Row – ch3, 1dc in the next 13dc, 3dc in next dc, 1dc in next 20dc, 3dc in next dc, 1dc in the next 29dc, 3dc in next dc, 1dc in the next 20dc, 3dc in the next dc, 1dc in the next 13dc, 1dc in turning ch. Turn. (108dc + ch3)

8th Row – ch3, 1dc in next 4dc, 2dc in next dc, 1dc in next 3dc, 2dc in next dc, 1dc in next 5dc, 5dc in next dc, 1dc in next 7dc, 2dc in next dc, 1dc in next 6dc, 2dc in next dc, 1dc in next 7dc, 5dc in next dc, 1dc in next 9dc, 2dc in next dc, 1dc in next 11dc, 2dc in next dc, 1dc in next 9dc, 5dc in next dc, 1dc in next 7dc, 2dc in next dc, 1dc in next 6dc, 2dc in next dc, 1dc in next 7dc, 5dc in next dc, 1dc in next 5dc, 2dc in next dc, 1dc in next 3dc, 2dc in next dc, 1dc in next 4dc, 1dc in top of ch3. Turn. (134dc + ch3)

Commence Skirt (divide for armholes)

ch3, shell (see abbrev) in next dc, * skip 2dc, shell in next dc, * rpt from * to * 4 times more, skip 2dc, shell in corner, skip next 28dc, shell in next corner, rpt from * to * 12 times more, skip 1dc, shell in corner, skip 28dc, shell in last corner, skip 1dc, shell in next dc, rpt from * to * 5 times more, skip 1dc, 1dc in top of ch3. Turn. (28 shell groups)

First Pattern Row – ch3, vst (see abbrev) in centre each of shell to end. 1dc in top of ch3. Turn. (28 vst)

Second Pattern Row – ch3, shell in each ch2 space of vst to end, 1dc in top of ch3. Turn.

Rpt First & Second Pattern Rows until work measures 9.5 inches from shoulder. Turn.

Work First Pattern Row once. Turn. Fasten off.

Change to color 2.

Next Row – sl st in 1st stitch, 3dc in vst, sl st in space between next two vst, * 3dc in next vst, sl st in space between next two vst, * rpt from * to * to last vst, work 3dc in vst, sl st in top of ch3. Fasten off.

Sleeves (x 2) With RS facing, join color 1 to corner of armhole edge, ch3, skip 1dc, shell in next dc, * skip 2dc, shell in next dc, * rpt from * to * 7 times more, skip 2dc, 1dc in corner, sl st to top of ch3 on beginning of row. Turn. (9 shell groups)

Slip stitching at the end of each row rpt First & Second Pattern Rows three more times or until under arm sleeve seam measures 4.5 inches. Turn.

Work First Pattern Row once. Turn. Fasten off.

Change to color 2.

Next Row – sl st in 1st stitch, 3dc in vst, sl st in space between next two vst, * 3dc in next vst, sl st in space between next two vst, * rpt from * to * to last vst, work 3dc in vst, sl st to sl st on beginning of row. Fasten off.

Button & Buttonhole Bands – Starting at lower edge with RS facing, work 40sc evenly up first front edge, 3sc in corner, 1sc in each ch around neck edge, 3sc in corner, work 40sc evenly down second front edge. Turn.

Button Band – ch1, work 1sc in each sc to neck edge. Turn.

Working from neck down, rpt last row. Fasten off

Buttonhole Band – Join color 1 to right front, starting at neck edge, ch1, 1sc in stitch at the base of the ch1, * ch2, skip 2sc, work 1sc in each of next 5sc, * rpt from * to * once more, ch2, skip 2sc, work 1sc in each sc to end. Turn.

Next Row – ch1, 1sc in stitch at the base of the ch1, 1sc in each sc and 2sc in each ch2 space to end. Fasten off.

Collar – With WS facing skip front edge band, join color 1 in first sc on corner of neck edge, ch3, skip 1sc, shell in next sc, * skip 2sc, shell in next sc, * rpt from * to * to last sc before buttonhole band, 1dc in last sc. Turn. (18, shell groups)

Rpt First & Second Pattern Rows once.

Work First Pattern Row once. Turn. Fasten off.

Join in color 2 with a sl st in first stitch, * 3dc in next vst, sl st in space between next two vst, * rpt from * to * to end, sl st in top of ch3. Fasten off.

Bloomers – With color 2, ch89 loosely, sl st to first ch to form a round, ch3, work 1dc in the stitch at the base of the ch3 * skip 3ch, work shell in next ch, * rpt from * to * to last 4ch, skip 3ch, work (2dc, ch1) in last ch, sl st to top of ch3 on beginning of row. Turn. (22, shell groups)

Row 1 – sl st to first ch1 space, ch5, 1dc in same space, work vst in each shell to end, sl st to 3rd of 5ch on beginning of row. Turn.

Row 2 – sl st to first ch space, ch3, work (1dc, ch1, 2dc) in same space, work shell in each vst to end, sl st to top of ch3 on beginning of row. Turn.

Rpt Rows 1 & 2 until work measures approx 5 inches. Turn.

Divide for legs – ch3, work Row 1 over next 11 shells, skip 11 shells, sl st to 3rd of 5ch on beginning of row. Turn. (11vst)

Continue on these st’s in pattern as set for right leg until work measures approx 9 inches from waist Turn.

Work Row 1 once. Turn. Fasten off.

Change to color 1.

Join in color 2 with a sl st in first stitch, * 3dc in next vst, sl st in space between next two vst, * rpt from * to * to end, sl st to first sl st. Fasten off.

Left Leg – With WS facing Join color 2 to first un-worked shell at division for legs, ch5, work 1dc in same space, work Row 1 over next 11 shells, sl st to 3rd of 5ch on beginning of row. Turn.

Continue on these remaining st’s and work the same as for right leg. Fasten off.

With color 2 and WS facing, start with ch1, 1sc in the stitch at the base of the ch1, work 67sc evenly along cast on edge at waist. Turn. Fasten off.

Join in color 1, starting with ch1, 1sc in the stitch at the base of the ch1, work 2 more rows of 1sc in each sc to end, sl st to first sc on beginning of each row. Fasten off.

Chain Tie – With color 1 ch120, sl st in 2nd ch from hook, sl st in each ch to end. Fasten off.

Bonnet – ch59, (RS) work shell in 5ch from hook, * skip 3ch, shell in next ch, * rpt from * to * to last 2ch, skip 1ch, 1dc in last ch. Turn. (14 shell groups)

Next row – ch3, work vst in each shell to end, 1dc in top of ch3. Turn.

Next row – ch3, work shell in each vst to end, 1dc in top of ch3. Turn.

Rpt the last 2 rows twice more until you have 4 shell rows worked in all from beginning. Fasten off.

Back Frill – With RS facing return to the ch3 at beginning of the last row worked and join in color 2, ch1, 1sc in the stitch at the base of the ch1, working in front loop of stitch only, work * 5dc in ch1 of shell, 1sc in space between this shell and next shell * rpt from * to * to end, 1sc in last dc, Fasten off. Turn.

Back Panel – With WS facing and working on the row below last row of 5dc groups, skip 5 shells, join color 1 between last and next shell, ch3, vst in ch1 space of next 4 shells, 1dc between next 2 shells. Turn. (see pic below)

Starting with ch3, work shell in each vst to end, 1dc in top of ch3.

Continue on these st’s, working vst row and then shell row until back panel fits along the side edges. Fasten off.

With WS facing join color 1 to starting chain edge, work 45sc evenly along ch edge. Turn.

Working through BLO work 1 row of 1sc in each to end. Turn.

Working through both loops from now on work 3 more rows of 1sc in each sc, turning at the end of each row. Fasten off.

Front Frill – With front of bonnet nearest to you and RS facing join color 2 to front loose loops (created when you worked in BLO), ch1, 1sc in the stitch at the base of the ch1, * skip 1sc, 5dc, in next sc, skip 1sc, 1sc in next sc, * rpt from * to * to end. Fasten off. (11, 5dc groups)

Joining Back Seams – Pushing back frill out of the way and on to the front of the hat, with WS facing join back seams.

Ties & Neck Edge

ch60. Fasten off (will come back to later)

ch61, sl st in 2nd ch from hook, sl st in each ch to end, with RS and back panel facing, join the chain tie to neck edge (see pic 1) work 44dc evenly along neck edge (pic 2), pick up 60ch made earlier, join chain tie to hat with a sl st, (pic 3), continue sl st in each ch to end. Fasten off.

Hope you enjoy this crochet matinee baby outfit pattern.

All pattern sizing, yarn weights, gauges etc on this website are approx as everybody crochets differently. Every effort is made to ensure the free crochet patterns are correct, but I am only human so mistakes may be made, if you find one please let me know by e-mail on [email protected]

If you wish to tell your friends and followers about this pattern, please only use a direct link to the pattern page on crochet ‘n’ create. DO NOT share the written instructions for this free crochet matinee baby outfit pattern.

~ I would love to see what you make
tag me on Facebook @crochetncreate ~